tel: +44 (0)1268 729393email:

LanCaster Pro ST

LanCaster Pro ST

Ref: 4403300

• Certifies cable continuity to TIA568A/B
• Records 1000 test results/view or download to pc
• Large 128 x 64 pixel LCD with backlight
• Multi-lingual customisable certification software
• Displays time and date for recording test data
• Measures length of all 4 pairs
• 150m (500ft) measuring range
• Voltage warning and test inhibit
• Indicates all common wiring faults
• Measures and identifies length to fault
• Graphical display gives unambiguous fault indication
• Complete with 1 active remote unit and test leads
• Up to 16 unique intelligent remote unit identifiers
• Up to 7 hours continuous battery life

Where to buy

The NEW Lancaster Pro-ST is a low cost wire map tester which tests and certifies structured cabling continuity to a TIA568A/B , USOC and ISDN standards. The new Lancaster Pro-ST displays on screen wiring configurations showing the length of all 4 pairs and length of pair to fault up to 150m (500ft).

The Lancaster Pro-ST will store up to 1000 test results which can be viewed or be downloaded to a PC via the lancaster pro-st software (provided). test results can then be customised with you corporate identity and certificates produced displaying the customer's location/job, length, cable VP and testing standard .

Maintaining all the proven features of the Lancaster Pro ST identifies all common faults on wiring schemes installed to TIA568A/B USOC and ISDN standards including open circuit wires, shorted pairs, shorts between pairs , crossed pairs , split pairs , pair reversals and shield /screen continuity.

In addition the Lancaster Pro-ST has a large backlit screen.

As with the standard Lancaster the Pro-ST can check installed wiring networks , alerting the operator if any telephone services are active on the cable test and can test for and indicate any other active services (10mb/s, 100mb/s, token ring etc. to prevent accidental testing of a live network. In addition, a built in tone generator (oscillator) transmits a warble tone into the cable enabling detection and tracing using a standard probe.

The LanCaster Pro-ST comes complete with one intelligent remote office identifier with a further 15 units available as optional accessories, unlike far end units on competitor products the Lancaster Pro-ST remotes are intelligent and indicate if the test has passed or failed.

Length Measurement 0 - 150m or 500ft
Faults Indicated Short Circuit Pair, Open Circuit Wire, Short Between Pairs, Split / Cross Pairs, Pair Reversals
Fault Display All Fault and setting info displayed graphically and textually, Shield Continuity
Fault Location Near or Remote End or distance if midway
Wiring Schemes TIA568A/B, USOC & ISDN
Service Indication Telephone, 10BaseT, 100Mbit+, Token Ring
Voltage Warning Warns off TNV (Telecom Network Voltage
Tone Generator Oscillating 810 / 1110Hz
Languages English (UK USA) German, French Spanish, Portuguese, Italian
Battery Life Indication (Gas Gauge) Bar Graph
Main Unit Display 128x64 graphical LCD
Remote Unit Display Green/Red LED
Power supply 4x1.5 AA alkaline Battery
Battery Life Standby 4000hrs Continuous testing> 7.5 hrs
Operating Temp. 0 to 40 deg. C
Storage Temp -20 to 70 deg. C
Weight 350gms (12oz)
Dimensions 165 x 90 x 37mm
Safety IEC61010-1
CE: Compliant with Current EU Directives
Burst: EN61000-4-4
EMC: EN50081 / 50082
Conducted RF: EN61000-4-6
ESD: EN61000-4-2
EM: EN61000-4-3


LanCaster Pro ST

No new updates presently available