The QUINTEST is a simple to use Structured Cabling Tester featuring a continually sequencing green / red LED display on both main and remote units.
The product caters for the most frequently used functions needed by Network Installation Engineers, and can test UTP and STP patch cables as well as installed wiring.
Wire Map and Cable faults, including Short Circuit Pairs, Open Circuit Pairs, Shorts between Pairs, Pair Reversals, Transposed Pairs and other Cable Miswires are indicated.
Additional LED indicators show screen continuity, when testing STP cables, and provide warning of a low battery condition.
When not in use, the two halves of the QUINTEST snap together by means of a magnetic clasp, providing protection against damage and automatically powering down.
Housed in a tough ABS plastic moulding, the QUINTEST is designed and manufactured to international standards for quality, safety and reliability.
Cable Types: UTP & STP
Power: PP3 9v Battery
Faults Indicated: Short Circuit Pair, Open Circuit Pair, Short Between Pairs, Transposed Pairs, Pair Reversals
Battery Life: 25Hrs Cont.
Wiring Schemes: TIA568 A/B & USOC
Operating Temp. 0 to 40 deg. C
Main Unit Display: Sequencing Red / Green LED
Storage Temp: -20 to 70 deg. C
Remote Unit Display Sequencing: Red / Green LED
Dimensions: 145 x 58 x 40 mm
Tone Generator: Oscillating 810 - 1110Hz
Weight: 175gms (5.6oz)
Low Battery Warning: LED Display
CE Compliance to EU directives: EMC BS/EN61326-1