tel: +44 (0)1268 729393email: sales@bicommunications.co.uk

TX2002 – Cable Fault Locator

TX2002  Cable Fault Locator

Ref: 4402500

• Lowest Cost Full Specification Professional Graphical TDR
• Rugged Palm Top Design 350g (12oz)
• 5 Measurement Ranges up to 3500m (11,500ft)
• 50, 75 & 100 ohm Selectable Cable Impedance!!
• Built in Tone Generator for Pair Tracing & Identification
• Suitable for testing all Communications Cables
• Water & Dust Proof to IP54
• Complete with tool-belt holster & test leads


Where to buy



The TX2002 is a professional Time Domain Reflectometer and Toner designed to detect and locate faults on copper communication cables up to a distance of 3500m (11,500ft).

Advanced signal processing techniques enable the TX2002 to find opens, short circuits, splices, taps, water ingress and other more elusive impedance mismatches. A built in oscillator also provides a tone for pair tracing and identification.

Selectable cable impedance matching, along with variable velocity factor, enable the TX2002 to be used to test all communication cables, including twisted pair and coaxial, with graphical results and fault distances displayed on a 64 x 128 dot matrix LCD. The LCD has an ultra bright electroluminescent backlight to ensure good readability in all lighting conditions

The TDR/Toner is housed in a tough, ruggedised ABS plastic moulding, water and dust proof to IP54, and supplied complete with test leads and a protective tool-belt holster.

The TX2002 is designed and manufactured to international standards for quality, safety and reliability.


Ranges @ Vp=70% 220, 440, 870, 1750 & 3500m 720,1440, 2850, 5740 & 11500ft
Power 6v 4 x AA cells
Range Selection Automatic range control
Power Down 3 Minutes
Accuracy and Resolution Approximately 1% of range
Operating Temp. 0 to 40 deg. C
Sensitivity min. 3 pixel return at 2 km (6 kft)
Storage Temp. -20 to 70 deg. C
Velocity Factor Adjustable from 1% to 99%
Dimensions (mm) 165 x 90 x 37
Output Pulse 5v p-p into open circuit
Weight 350gms (12oz)
Output Impedance Selectable 50, 75 & 100 ohms
Safety IEC61010-1 EN60950
Output Pulse Width 25ns min. 1.6us max.
EMC BS/EN61326-1
Scan Rate 6.7 scans per second
CE Compliance To EU directives
Tone Generator Oscillating 810 - 1110Hz
Water / Dust Proof IP54


TX2002datasheet

TX2002manual



Quantity: